JHPRO JH-150 with 2 Chisel Bits Electric Demolition Jack Hammer Tool

Short Description:

JHPRO demolition hammer is used for pipe laying, machinery installation, water supply and drainage facilities construction, interior decoration, port facilities and other construction engineering construction . we specializes in manufacturing high-quality power tools that can be relied upon to deliver a top-notch working performance. So if you are looking for an affordable demolition hammer that has the power for heavt-duty tasks like installing sliding doors to renovating your bathroom, then the JH150 is a very good choice.

This demolition hammer drill specialist tool for breaker through and demolition work ,Low vibration in operation and no load.Professional for slotting operation, new technical motor steadier high quality,With 45 Joules of impact power and an impact rate of 1900bpm, you be able to smash through heavy duty concrete slabs and masonry blocks without breaking a sweat.

The soft grip rear handle and lock-on switch reduces fatigue, so you can keep crushing concrete until its time to down tools. The tool-less quick-change chuck makes changing chisel bits simple and there are two bits included to get you started.

JH150 is a aluminum boday demolition hammer. Equipped 45*94 mm copper wire motor,really power for 1700W ,It can meet the requirements of heavy duty broken concrete. double insulated motor improves safety. JHPRO professional grade electric hammer is operator’s dream as it is fast with high power ,comfortable to hold . The hammer also comes with an good quality chisel and iron case.

Product Detail

Product Tags

This is our 1700 watt electric demolition jack hammer breaker which is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more! Adjustable 360° foregrip provides extra control and comfort during extended use. Don’t hesitate to bring one home. It is characterized by heavy duty construction with industrial grade for high durability. It has the features of two chisels for multiply functions. 360 degree swivel handle, non-slip handle for stable grips. The mounted handles is also used for absorbing vibration to reduce operation fatigue.


Crushing concrete, chipping, digging and squaring.


1. After placing the tip of the tool in the base hole, swith ON. In some cases, it is necessary to punch the up of the bit against the crushing position forcibly in order to begin the strinking stroke. This is not due to malfunction of the tool. It means that the safe guard mechanism against no-load striking it working.

2. By utilizing the weight of the machine and by holding the hammer with both hands, one can effectively control the subsequent recoil month motion. Preceed at a moderate work-rate, the use of too much force will impair efficiency.

Caution: Sometimes the tool does not begin the striking stroke even when the motor rotates because the oil has become thick. If the tool is used at low temperatures or if it is used after a long time idle, the tool should be used running in for 5 mins in order to warm it up.


1. Insepecting the tool

Since use of a dull tool will cause motor malfunctioning and degraded effeciently, when it replace with a new or without delay when abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. Failure to do so could result in serious hazzard.

3. Maintenance of the motor

The motor unit winding is the very heart of the power tool. Exercise due care to ensure the winding does not become damaged and/or wet with oil or water.

4. Inspecting the carbon brushes

The motor employs carbon brushes which are consumable parts. When they become worn to or near wear limit, it could result in motor trouble. When an auto-stop carton brush is equipped, the motor will stop automatically. At that time, replace both carbon brushes with new ones which have the same carbon brush Nos, shown in the figgure.

In addtion, always keep carbon brushes clean and ensure that they slide freely within the brush holders.

Replacement steps: The carbon brush can be removed by removing the cap cover, cap rubber and brush cap in that order at the interior.

JH-150 Specification Accessories
Rated voltage: 230V
Rated power input: 1700W
Impact rate: 1900Bpm
Impact energy: 60J
Tool holder: Hex.30mm
Motor: 45*94mm
QTY/CTN: 1pc
Inner box: Metal box
Carton package: 71*17*30 CM
N.W/G.W: 14.3/22KG
Hex point chisel: 1pc 30*400mm
Hex flat chisel: 1pc 30*400mm
Auxiliary handle: 1pc
Socket head wrench: 3pc
Wrench: 1pc
Oilcan: 1pc


1.With dual-piston work,It has high hammer and impact force;
2.It is the king of breaker,and can professional breaking for stone;
3.It used spring pad to firm the body;
4.The motor is made of copper,can continue to work for long time.
5.Ergonomic handle to improve working comfort;
6.HEX tool holder with integrated dust protection;
7.Smart linear type ergonomic design,easy access to the workplace.
8.Powerful crushing damage function
9.Reliable mechanical devices, long-term durability
10.Extra thick and strong aluminum main casing
11.Double insulated motor casing design, delivering more secure operation
12.360 degrees swivel side handle for easy control
13.Lock-on button allows continuous operation without holding the trigger

JH150 (2)

JH150 (3)

JH150 (4)

JH150 (5)

JH150 (6)

JH150 (7)

  • Previous:
  • Next:

  • Write your message here and send it to us